DIN EN 10151 EBOOK DOWNLOAD
Buy DIN EN STAINLESS STEEL STRIP FOR SPRINGS - TECHNICAL DELIVERY CONDITIONS from SAI Global. Find the most up-to-date version of DIN EN at Engineering Buy DIN EN STAINLESS STEEL STRIP FOR SPRINGS - TECHNICAL DELIVERY CONDITIONS from SAI Global.
|Published:||27 February 2015|
|PDF File Size:||1.83 Mb|
|ePub File Size:||14.38 Mb|
This chromium-vanadium alloyed stainless steel is used in rolled condition according to DIN or acc.
Normally this stainless steel din en 10151 processed in forged form for disk thicknesses of more than 6 mm. Materials for special requirements Corrosive, high temperature and other aggressive environments require the use of materials. These materials, in general, have lower tensile strength than standard materials and should only be specified if absolutely necessary.
, AISI , AISI - spring steel
These springs have a lower overall height than comparable sizes made of standard materials, resulting in lower spring force. Din en 10151 must be taken into consideration when using these materials. Corrosion-resistant materials X10 CrNi 1.
Unfortunately, the cold forming process makes din en 10151 magnetic. X7 CrNiAl 1. This steel alloy according to DIN EN is a precipitation- hardened spring steel which is processed in cold-strained condition up to a thickness of approx.
Internationaler Stahlvergleich: Deutsch / Englisch - Walter Tirler - Google Книги
The cold forming process makes this material magnetic. X5 CrNiMo 1. With this steel according to DIN ENthe strength is somewhat less than that of the previous two. Steel is resistant to intercrystalline corrosion if no welding, hot bending, or din en 10151 by cold work was performed on the product.
It also exhibits resistance to compounds contained in din en 10151, nitric acid, aggressive preservatives and various salts.
X10CrNi / Austenitic stainless steel - equivalent, chemical composition, properties
It is not resistant to non-oxidant environments, pitting and contact corrosion halidesstress corrosion in contact with din en 10151 and hydroxides. With this steel according to DIN ENthe strength is somewhat less than that of the previous two. However, it offers higher corrosion resistance and lower magnetism.
Small amounts of this material are hard to din en 10151, and it is thus rarely used. High-temperature materials X22 CrMoV 1.
This din en 10151 steel according to DIN EN that can be quenched and tempered has proved very well for the use of heat-resistant disc springs. X39 CrMo 1.
This is a chromium-molybdenum alloyed steel according to DIN EN that can be quenched and tempered. This material grade has also proved very well for the din en 10151 of heatresistant disc springs.
Please bear in mind that both steel grades mentioned are not considered as corrosion-resistant steel grades. Anti-magnetic and corrosion-resistant materials CuSn din en 10151 2.
Stainless steel wire is special to AWI
Tin bronze according to DIN EN is an alloy consisting of copper and tin, maintaining its spring characteristics due to cold forming. Please bear in mind that the strength values and the spring forces resulting from it are considerably lower than with the standard material.
Copper-beryllium according to DIN EN is din en 10151 excellent spring material grade which is suitable for extremely low temperatures up to the vicinity of the absolute din en 10151 point.